The Cross SCA2, SCA2-ORB series is a rugged and dependable low-cost valve. It is a series type and is recommended for all general purpose applications except lifting heavy loads in a vertical position. It will operate a double-acting cylinder or a bi-directional motor required to hold a load in neutral.
Features:
| SERIES | C |
| BRAND | CROSS MANUFACTURING |
| MAX FLOW LPM | 95 |
| NOTES | OPEN CENTRE |
| MAX PUMP FLOW l/min | 95 |
| MAX WORKING PRESSURE bar | 172 |
| CONSTRUCTION | SYMMETRICAL |
| CIRCUIT | PARALLEL |
| NUMBER OF SECTIONS | 1 TO 2 |
| SPOOL ACTUATION | MANUAL, CABLE, PNEUMATIC, HYDRAULIC PILOT |
| SERIES | C |
| MONOBLOCK STYLE | YES |
| SECTIONAL LOAD CHECK VALVE | YES |
Series HDM directional control valves feature compact, cast monoblock bodies and have high operating pressure ratings.
A further notable feature is the very low level of internal spool leakage.
Number of spools d’axes: 1 – 6
Nominal flow rate l/min: 45
Max. inlet pressure (P) bar: 250
Max. work port press. (A/B) bar: 320
Compact and simple with the versatility of the configuration of up to 4 sections. It can be fitted with manual and electric push-pull controls.
Nominal Flow Rating l/min – (US gpm): 15 (4)
Max. Pressure bar – (psi): 280 (4050)
Number of Sections: 4
Pitch mm (in): 28 (1,10)
Series HDM directional control valves feature compact, cast monoblock bodies and have high operating pressure ratings.
The HDM series is available in the following versions: open centre, parallel/series, closed centre and carry-over.
A further notable feature is the very low level of internal spool leakage.
Series HDM directional control valves feature compact, cast monoblock bodies and have high operating pressure ratings.
A notable feature is the very low level of internal spool leakage.
DCF directional flow control valve combines the features of a four-way directional control valve, a full range pressure compensated by-pass type flow control valve, and a pilot operated pressure relief valve, all in one compact package.
The CROSS series B directional control valves provide good metering characteristics and long dependable service life. Optimum versatility is provided due to the many standard and optional features. Balanced spools are select-fit for minimum leakage and load holding checks prevent load drop when shifting. Parallel flow path permits spools to be operated independently or simultaneously.
Monoblock composed of 1-7 mechanical sections.
Interchangeability of all the spools.
Monoblock construction with sectional concept.
Spool construction in steel, hardened and chromium-plated.
Parallel circuit, load check valve protection on each section.
Auxiliary valve either on port A or B or on both.
Single/double acting conversion port valve.
Electric carry over.
