MANP

Description

MANP2 – Two-Axis Potentiometric Joystick

Potentiometers electrical features:

• Overall resistance: 0.5 kOhm
• Max power supply (Vin): 30
• Middle output voltage (Vout): 50% Vin (± 1%)
• Min output voltage (Vout) = 27% Vin (± 1%)*
• Max output voltage (Vout) = 73% Vin (± 1%)*

NO contact electrical features:

• Max current: 200mA (resistive load)
• ON/OFF contact activation angle: 2° (in each direction)
• Life: 10 cycles (with a 200 mA current)
  5×10 cycles (with a 10 mA current)

Physical features:

• Breakout force: 2.3N
• Maximum operating force: 6 N
• Mechanical operating angle: ±18°
• Insulation resistance at 50 V : > 50 MOhm
• Weight: 120g
• Operating temperature range: -40 °C ÷ +70 °C
• Environmental rating: IP65
• Connector: Panduit Mascon 2.54mm 8p

Order code:

A1000380400 (without wires)
A1000380404 (with 50 cm wires)

MANP3 – Three-Axis Potentiometric Joystick

Potentiometers electrical features:

• Overall resistance: 0.330 kOhm
• Max power supply (Vin): 30
• Middle output voltage (Vout): 50% Vin (± 1%)
• Min output voltage (Vout) = 27% Vin (± 1%)*
• Max output voltage (Vout) = 73% Vin (± 1%)*

NO contact electrical features:

• Max current: 200mA (resistive load)
• ON/OFF contact activation angle: +/- 1° (X and Y axis )
• ON/OFF contact activation angle: +/- 2° (rotating handle)
• Life: 10 cycles (with a 200 mA current)
  5×10 cycles (with a 10 mA current)

Physical features

• Breakout force: 2.3N
• Maximum operating force: 6 N
• Mechanical lever operating angle: ±13°
• Mechanical handle operating angle: ±27°
• Insulation resistance at 50 : > 50 MOhm
• Weight: 120g
• Operating temperature range: -40 °C ÷ +70 °C
• Environmental rating: IP65
• Connector: Panduit Mascon 2.54mm 8p

Order Code

A1000380402 (without wires)
A1000380403 (with 50 cm length wires)

MANP4 – Contactless Two-Axis Joystick

Electrical features:

• Dual independent outputs, with same phase
• Supply voltage (Vs): 5Vdc ±0.5Vdc regulated transient free
• Output impedance: 100 Ohm each axis
• Centre tap voltage (No load): 50%Vs ±1%
• Center tap impedance: 1.1 kOhm
• Return to centre voltage (No load):
  • Within ±60mV of Vs/2 @ 20°C (±73mV over full temperature range)
• Output voltage span: ±25.0% to ±30.6% with respect to Vs/2
• EMC immunity level:
  • 60V/m, 25MHz to 1GHz, 1KHz 80% sine wave modulation,
    EN50082-2 (Sept 1995)
• EMC emissions level:
  • Complies with EN50081-1 (1992), 30MHz – 1GHz
• ESD immunity level:
  • EN50082-2 (1995) ±8kV Contact discharge; ±15kV Air discharge
    (10 discharges)

Physical features:

• Breakout force: 1 N
• Operating force: 2 N (full deflection)
• Maximum allowable: 300 N
• Square gate
• Mechanical operating angle: ±14°flat (±20° diagonal)
• Weight: 120g
• Expected life: 15 x 10 cycles
• Operating temperature range: -25 °C ÷ +70 °C
• Storage temperature range: -40 °C ÷ +70 °C
• Environmental rating: IP65 BS EN 60529
• Connector: 8 Pin Berg Minitek 90309-008 Shrouded IDC Header
• Mating connector: 8 Pin Berg Minitek 89361-708 IDC Connector

Order Code

A1000380600 (without cable)
A1000380602 (with 50 cm flat cable)